Samedaytuning
2006 - 2019 Mercedes Sprinter 3.0L | Bench Flash
2006 - 2019 Mercedes Sprinter 3.0L | Bench Flash
We've revamped our tune file processing system! After you place your order, you'll receive an order confirmation email that includes a tune form to fill out out your vehicle. You can also view this at the top of the website. This helps us get all your tuning information in one place to process it quickly.
Couldn't load pickup availability
The 3.0L Diesel Mercedes Sprinter's require a bench flash of the pcm. These need to be pulled out (typically located on the driver side engine bay. easy to get to), and mailed to us. Typical turn around is 48 business hours.
Off Road Tuning available for the following models:
- 2006+ 316 CDI, 213 BlueTEC, 413 Bluetec, 413 Bluetec, 513 Bluetec, 516 Bluetech, 313 Bluetec & 2013-2017 219 Bluetec, 319 Bluetec, 519 Bluetec
ECM compatibility:
- Bosch EDC16CP31
- Bosch EDC17CP46
- Bosch EDC17CP57
You can email dan@samedaytuning.com to verify compatibility. We will need a picture of the PCM information.
Important note before removing your vehicles computer:
Note of any maintenance or engine lights on the dash. You should have no errors before removing the ECM. If you have a DEF/DPF countdown issues prior to tuning, those should be cleared with a hand tool (snap on, Autel, etc). Since those are transmitted by the SCR module, it will typically stay in the cluster unless cleared before hand. Be sure your codes are all cleared before you remove the ECM.
steps:
1- Clear all codes. 2- Turn the key to the off position. 3- Remove the negative cable from the battery. 4- Remove ECM.
Power Levels:
- Stock
- +20HP
- +50HP
Share

Subscribe to our emails
Be the first to know about new collections and exclusive offers.